By the Scrap Bhai team · Updated 19 November 2026
Quick answer
To start a recycling business in India, pick one material (plastic, paper, metal, e-waste, batteries or tyres), begin with collection and sorting to secure supply and buyers, and add machines such as a baler, shredder or granule line step by step. Register the business (GST, Udyam), take State Pollution Control Board consent before any processing, and for plastic, e-waste, batteries, tyres and vehicles register on the CPCB EPR portal, where registered recyclers also earn from EPR certificates.
What a recycling business does
Recycling turns waste into raw material that factories use again: sorted paper goes to paper mills, steel Scrap to furnaces, plastic flakes and granules to plastic product makers, and metals recovered from e-waste to refiners. A recycling business earns at one or more of these points:
- Collection: bringing small lots together from homes, shops, offices and kabadiwalas.
- Sorting and grading: separating material by type and grade, because clean grades sell for much more.
- Processing: baling, cutting, shredding, washing, granulating or dismantling, which adds the most value.
- Compliance: registered recyclers can also earn from EPR certificates that producers must buy.
Pick your model: trade, sort or process
| Model | What you do | Money and permissions |
|---|---|---|
| Collect and trade | Buy from kabadiwalas, shops and offices; sell in bulk to recyclers | Lowest: godown, scale, vehicle, working capital, basic registrations |
| Sort and bale | Grade the material and press it into bales for mills | Medium: a bigger godown, a baler, labour and power; check Pollution Control Board rules |
| Process | Shred, wash, granulate, dismantle or crumb the material | Highest: factory shed, machines, industrial power, consent from the Pollution Control Board and, for many materials, CPCB EPR registration |
Most successful recyclers start at the first step. Trading for a while shows you which material is steady in your area, who pays on time and how much you can sell each month, before you spend on machines.
Which material to recycle
| Material | What you sell | Main rule to follow |
|---|---|---|
| Plastic | Sorted plastic, flakes or granules | Plastic Waste Management Rules; register as a recycler on the CPCB EPR portal |
| Paper and cardboard | Sorted and baled gatta, raddi and kraft for paper mills | Pollution Control Board rules for the godown or unit |
| Metal | Sorted, cut, baled or shredded Scrap for mills and foundries | Pollution Control Board consent for cutting and shredding; melting needs a full furnace licence |
| E-waste | Dismantled parts, boards and metals for recyclers and refiners | E-Waste (Management) Rules, 2022; CPCB EPR registration for recyclers and refurbishers |
| Batteries | Recovered lead, lithium and other materials | Battery Waste Management Rules, 2022; only registered recyclers may break batteries |
| Tyres | Crumb rubber, reclaimed rubber or pyrolysis products | EPR for waste tyres under the hazardous waste rules; CPCB registration |
| Old vehicles | Parts, metal and materials from scrapped vehicles | Vehicle scrapping facility (RVSF) rules, 2021 and the End-of-Life Vehicles Rules, 2025 |
Not sure how to tell the grades apart? Start with Types of Scrap: metal, paper, plastic and e-waste grades.
Machines and space
- For every model: a stamped weighing scale, a covered godown, a vehicle or transport tie-up, and fire safety equipment.
- Paper and plastic: a baling press to make bales that mills accept and trucks carry efficiently.
- Plastic processing: a shredder or grinder, a washing line, a dryer and, for granules, an extruder line.
- Metal: a magnet and sorting area, a shearing or cutting set-up, and a baler for light Scrap.
- E-waste: a clean dismantling area with tools, safe storage for hazardous parts and data-wiping for IT equipment.
- Tyres: a tyre cutter and shredder, and a crumb rubber line for the next stage.
Processing units need an industrial power connection and usually an industrial area. Ask the State Pollution Control Board which zones allow your activity before you rent or buy land.
Where the money goes
The money needed changes a lot with the model and the material, so build your own budget with real quotes instead of trusting a fixed figure. Plan for:
- Space: rent and deposit for the godown or shed.
- Machines: take at least three quotes, and ask about power, output per hour and service.
- Power and set-up: the industrial connection, wiring, flooring and drainage.
- Working capital: money to buy material every day while you wait for buyers to pay. This is often the biggest amount.
- Permissions: fees for consents, registrations and the consultant who prepares the papers.
- People: sorters, machine operators and a supervisor.
For a detailed way to work out your budget, read Scrap business investment, and for the margin side, Scrap business profit per month.
Registrations and permissions
- GST and Udyam registration. In Udyam, a processing unit can choose NIC code 38300 (materials recovery) along with 46699 for trading.
- Trade licence and Shop and Establishment registration as your city requires.
- Consent to Establish from the State Pollution Control Board before you build or install machines, and Consent to Operate before you start production.
- EPR registration on the CPCB portal for plastic, e-waste, battery, tyre and vehicle recycling.
- Factory licence and fire safety approval as your state’s rules require for the number of workers and the material you store.
- Hazardous waste authorisation if you handle used oil, battery acid or other hazardous material.
The full list for traders, with the documents to keep ready, is in Scrap business licence and registration. Tax rules, including reverse charge on plastic, tyre and e-waste Scrap from 1 November 2026, are in GST on Scrap.
EPR: extra income for registered recyclers
Under Extended Producer Responsibility (EPR), companies that make or sell plastic packaging, electronics, batteries, tyres and vehicles must make sure a share of what they sell is collected and recycled. They meet this target by buying EPR certificates generated by registered recyclers on the CPCB portal for the material they actually recycle.
- Only registered recyclers with valid consents can generate EPR certificates.
- Records must match: purchase bills, weight slips, processing records and sales of recycled output.
- Fake or inflated certificates lead to penalties and cancellation of registration, so keep every record clean.
Who buys recycled material
- Paper mills buy baled gatta, raddi and kraft.
- Steel plants, induction furnaces and foundries buy sorted iron and steel Scrap.
- Copper, brass and aluminium units buy sorted non-ferrous Scrap.
- Plastic product makers buy flakes and granules.
- Registered e-waste recyclers and refiners buy boards and dismantled parts.
- Producers and brands buy EPR certificates from registered recyclers.
Visit buyers before you start, ask for their quality specifications in writing and agree payment terms. Selling to two or three buyers protects you if one delays payment.
Risks to plan for
- Rate swings: recycled material follows commodity prices, which can fall fast.
- Quality rejections: moisture, mixing and dirt lead to deductions or returned loads.
- Supply gaps: machines lose money when they stand idle, so secure steady supply first.
- Fire: paper, plastic and tyres burn easily; keep extinguishers, gaps between stacks and no smoking.
- Pollution complaints: smoke, wash water and noise lead to notices and closure, so follow your consent conditions.
- Stolen material: check sellers and keep bills, as in every Scrap business.
A step-by-step plan
- Pick one material that is steady and plentiful in your area.
- Map the buyers: visit mills and recyclers, and note their rates, quality needs and payment terms.
- Start by collecting, sorting and selling in bulk from a small godown.
- Register the business and get your scale stamped.
- Track your monthly volume, margin per kg and payment days for a few months.
- Choose the first machine that adds value to your material, such as a baler.
- Talk to the State Pollution Control Board about zoning and consent before you rent a shed.
- Take Consent to Establish, install machines, then take Consent to Operate.
- Register on the CPCB EPR portal if your material is covered, and keep complete records.
- Grow with steady supply contracts from factories, offices and bulk generators.
पहले माल और खरीदार पक्का करो, फिर मशीन लगाओ।
Start your Scrap business with Scrap Bhai
We do all of this with you, step by step: material identification, rates, buying, selling, fraud safety and a weekly live doubt session. The full path is in the Scrap Bhai Scrap Business Roadmap. For rates, setup support and a network together, see the Scrap Business Franchise.
Common questions
How do I start a recycling business in India?
Choose one material, start with collection and sorting so you know the supply and the buyers, then add machines such as a baler or shredder. Register your business, take State Pollution Control Board consent before any processing, and for plastic, e-waste, batteries, tyres and vehicles also register on the CPCB EPR portal.
Which recycling business is most profitable in India?
There is no single answer. Metal and e-waste carry high value per kg, plastic recycling adds value by turning Scrap into flakes or granules, and paper earns on volume. The most profitable one for you is the material with steady supply in your area, a buyer who pays on time and rules you can follow fully.
What licence is needed for a recycling plant?
Usually GST and Udyam registration, Consent to Establish and Consent to Operate from the State Pollution Control Board, a factory licence and fire safety approval as your state requires, and EPR registration on the CPCB portal for plastic, e-waste, battery, tyre and vehicle recycling.
Can I start a recycling business with little money?
Yes, at the collection and sorting stage. A small godown, a weighing scale, a vehicle and working capital are enough to buy, sort and sell clean material to bigger recyclers. Machines and a processing plant need much more money, permissions and power, so add them once your supply and buyers are steady.
What are EPR certificates in recycling?
Under Extended Producer Responsibility rules, companies that make or sell plastic packaging, electronics, batteries, tyres and vehicles must make sure a share of their waste is recycled. Registered recyclers generate EPR certificates on the CPCB portal for the material they recycle, and producers buy these certificates, which gives registered recyclers a second source of income.
This guide is general information, not legal, tax or investment advice. Rules and rates change, so confirm the details with a CA or your local office before you act.